Mini Factory 62.3mm Exhaust Clamp for the JCW Exhaust system.  Sold each.

Fits the following models when installing the JCW Rear Section Exhaust:

2002-2006 R53 MINI Cooper S Hardtop
2005-2008 R52 MINI Cooper S Convertible

Mini Cooper JCW Exhaust Rear Section.  This is the same exhaust rear section that was installed by the factory on the Gen1 JCW models.  If the stock mufflers on your Cooper S has rusted out, this is a great replacement with a slight upgrade in performance and a sporting tone!

The JCW Exhaust Rear Section does not include the JCW Exhaust Tips or the JCW Exhaust Clamp.  Select the 'Complete Kit' for a complete kit to include all these parts.

Fits the Following models:

01/2004-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible

Fits the following models with slight modifications (see note below):

2002-12/2003 R50 MINI Cooper and R53 Cooper S Hardtop

The pipe diameter is 2.25" from the secondary cat to the Y, then its 2.0" from the Y to the mufflers, and 1.5" from the mufflers to the tips.

NOTES: 

• On JCW and Cooper S models built before January 2004, the inside hangers will need to be rotated 90 degrees.  On these earlier models, all 4 hangers are oriented front-to-back.  Beginning with the 01/2004 production, the inside hangers are oriented side-to-side.  Any muffler shop should be able to heat the hanger with a torch and change the orientation.
• For the Cooper S models, this Rear Section must be spliced in to replace the original Cooper S rear section. Professional installation is recommended.
• Choose the 'Complete Kit' for everything you need to install this system.  

Mini Cooper JCW Exhaust Rear Section Install Kit.  This is the same exhaust rear section that was installed by the factory on the Gen1 JCW models.   If the stock mufflers on your Cooper S has rusted out, this is a great replacement with a slight upgrade in performance and a sporting tone!

This Complete Kit includes:

• JCW Exhaust Rear Section
• JCW Exhaust Chrome Tips (one pair)
• JCW Exhaust Clamp

Fits the Following models:

01/2004-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible

Fits the following models with slight modifications (see note below):

2002-12/2003 R50 MINI Cooper and R53 Cooper S Hardtop

The pipe diameter is 2.25" from the secondary cat to the Y, then its 2.0" from the Y to the mufflers, and 1.5" from the mufflers to the tips.

NOTES: 

• On JCW and Cooper S models built before January 2004, the inside hangers will need to be rotated 90 degrees.  On these earlier models, all 4 hangers are oriented front-to-back.  Beginning with the 01/2004 production, the inside hangers are oriented side-to-side.  Any muffler shop should be able to heat the hanger with a torch and change the orientation.
• For the Cooper S models, this Rear Section must be spliced in to replace the original Cooper S rear section. Professional installation is recommended.
• Choose the 'Complete Kit' for everything you need to install this system.