AUTOMATIC TRANSMISSION FLUIDS
see our Mini Cooper Automatic Transmission Fluid Application Guide for more options
MANUAL TRANSMISSION FLUIDS
see our Mini Cooper Manual Transmission Fluid Application Guide for more options
100% synthetic lubricant for all mechanical transmission of high performances and racing cars. For synchronised or not synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. 0% shear loss: Unshearable oil film in extreme conditions. Very high lubricating power which decreases friction and wear. 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow comfortable gear shifting.
This is the transmission fluid recommended by OS Giken when running their Limited Slip Differential.
NOTE: GROUND SHIPPING ONLY.
Standards: API GL4 and GL5 / MIL-L-2105D
- 100% synthetic extreme pressure lubricant for an efficient anti-wear protection, a better resistance at high temperature and a longer life time.
- 0% shear loss : Unshearable oil film in extreme conditions.
- Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 standard, July 1998 update.
- Very high lubricating power which decreases friction and wear.
- 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to
reduce transmission noise. - Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
- Less effort required on the gear lever to shift the gears.
- Suitable for any type of seal and yellow material used in gearboxes design.
- Anti-corrosion, Anti-foam.
PROPERTIES
Visocity grade | SAE J306 | 75W90 |
Density at 20°C (68°F) | ASTM D1298 | 0.897 |
Viscosity at 40°C (104°F) | ASTM D445 | 72.6 mm²/s |
Viscosity at 100°C (212°F) | ASTM D445 | 15.2 mm²/s |
Viscosity index | ASTM D2270 | 222 |
Flash point | ASTM D92 | 200°C / 392°F |
Pour point | ASTM D97 | -60°C / -76°F |
100% synthetic lubricant for all mechanical transmission of high performances and racing cars. For synchronised or not synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. 0% shear loss: Unshearable oil film in extreme conditions. Very high lubricating power which decreases friction and wear. 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow comfortable gear shifting.
This is the transmission fluid recommended by OS Giken when running their Limited Slip Differential.
NOTE: GROUND SHIPPING ONLY.
Standards: API GL4 and GL5 / MIL-L-2105D
- 100% synthetic extreme pressure lubricant for an efficient anti-wear protection, a better resistance at high temperature and a longer life time.
- 0% shear loss : Unshearable oil film in extreme conditions.
- Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 standard, July 1998 update.
- Very high lubricating power which decreases friction and wear.
- 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to
reduce transmission noise. - Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
- Less effort required on the gear lever to shift the gears.
- Suitable for any type of seal and yellow material used in gearboxes design.
- Anti-corrosion, Anti-foam.
PROPERTIES
Visocity grade | SAE J306 | 75W90 |
Density at 20°C (68°F) | ASTM D1298 | 0.897 |
Viscosity at 40°C (104°F) | ASTM D445 | 72.6 mm²/s |
Viscosity at 100°C (212°F) | ASTM D445 | 15.2 mm²/s |
Viscosity index | ASTM D2270 | 222 |
Flash point | ASTM D92 | 200°C / 392°F |
Pour point | ASTM D97 | -60°C / -76°F |

Loading...

Loading...

Loading...

Loading...

Loading...