Braided Oil Cooler Hoses Kit For Sprites & Midgets 1961-74

We can supply Moquip 100R6 with a stainless steel braided cover where enhanced appearance and extra abrasion resistance is required. Competition regulations invariably require a braided covering for hoses running through the cockpit area.The lightweight mild steel fittings with serrated shaft are usually swaged to the hose at our factory. When ordering,measurements should be taken from mating face to mating face, if the assembly does not include a straight fitting, orientation of fittings may be specified, although the swaged ferrule may be clamped in a vice and the fitting rotated to the desired position. When required for on-site assembly use with a worm drive clamp tightened to 10 inch/pounds (1.2Nm), an O-clamp which is secured with pincers is a neat alternative, use a Proclamp if hose is wire braided to avoid unsightly frayed ends.