The Carbon Fiber Big Scoop inlet upgrade is an oversized hood scoop that allows greater airflow into the engine compartment for better cooling. Quality product from Italy is a functional and visual upgrade for your MINI. Clear finish shows the carbon fiber weave and is ready to install.

Fits the following Cooper S models:

2014-2021 F56 MINI Cooper S Hardtop
2015-2021 F55 MINI Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper S Convertible
2016-2021 F54 MINI Cooper S Clubman 

IMPORTANT: This is NOT a stick-on product that fits over the original scoop. The original scoop is removed and the Big Scoop gets glued into place using body panel adhesive or silicone adhesive (not included). See tutorial below.

Imported from Italy, these are quality products made by a company whose mission is to keep up with the times in the development, and at the cutting edge of the construction and design techniques, to be in constant evolution with the market trend. 

NOTES:

• Available in unpainted fiberglass or carbon fiber - select accordingly.
• Professional installation is strongly recommended.

These products are 'made-to-order' in Italy and may take 2-3 months for delivery. 

Installation requires the factory original clips. If you are not able to salvage the clips from your factory scoop, here are the replacement clips.

Installation tutorial

Factory clips are installed

Adhesive applied

Big Scoop installed

Allow to dry for 24 hours before driving or washing the car.

This unpainted Fiberglass Big Scoop inlet upgrade is an oversized hood scoop that allows greater airflow into the engine compartment for better cooling. Quality product from Italy is a functional and visual upgrade for your MINI. 

NOTE: Product is shipped 'unpainted' and will require painting once you receive it. Photo shown is a finished / painted example. Grille not included

Fits the following Cooper S models:

2014-2021 F56 MINI Cooper S Hardtop
2015-2021 F55 MINI Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper S Convertible
2016-2021 F54 MINI Cooper S Clubman 

IMORTANT:

• This is NOT a stick-on product that fits over the original scoop.
• This product requires painting before installation.
• The original scoop is removed and the Big Scoop gets glued into place using body panel adhesive or silicone adhesive (not included).
• See tutorial below.

Imported from Italy, these are quality products made by a company whose mission is to keep up with the times in the development, and at the cutting edge of the construction and design techniques, to be in constant evolution with the market trend. 

NOTES:

• Available in unpainted fiberglass or carbon fiber - select accordingly.
• This hood scoop does not have a grille
• Professional installation is strongly recommended.

These products are 'made-to-order' in Italy and may take 2-3 months for delivery. 

Installation requires the factory original clips. If you are not able to salvage the clips from your factory scoop, here are the replacement clips.

Installation tutorial (same procedure for gen3 models)

Factory clips are installed

Adhesive applied

Big Scoop installed

Allow to dry for 24 hours before driving or washing the car.