Performance IP Multi-Spark Ignition Coils from Ignition Projects for your Gen2 Mini! Better spark = better combustion = MORE POWER!

Ignition Project's Multi-spark technology creates a secondary voltage and produces a 46% increase in secondary current. This technology allows the coils to recharge faster producing two sparks within one millisecond to ensure complete and consistent combustion. With constant research and development, Ignition Projects built the Multi-spark system directly into the ignition coil without using an external discharge box.

Ignition Projects built the Multi-spark system directly into the ignition coil without using an external discharge box. The Multi-spark technology creates a secondary voltage and produces a 46% increase in secondary current. This technology allows the coils to recharge faster producing two sparks within one millisecond to ensure complete and consistent combustion.

Each kit includes a set of 4 coil packs.

Fits the following models:

2014-2022 F56 MINI Cooper and Cooper S Hardtop
2015-2022 F55 MINI Cooper and Cooper S Hardtop 4-door 
2016-2022 R57 MINI Cooper and Cooper S Convertible
2016-2022 F54 MINI Cooper and Cooper S Clubman
2017-2022 F60 MINI Cooper and Cooper S Countryman

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!

See Technical Paper.  

NOTE:  When installing these coil packs, the female electrical connector from the harness must be completely seated into the ignition coil before the connector locking mechanism is rotated into place.

We worked with various Professional Race Teams in Road, Circuit and Drifting to conduct research and development. Our products are designed to perform and it’s important to have our products being abused through real racing conditions. 

Engineered in Japan, Handmade in USA. Ignition Projects IP Coils are designed in Japan and handmade at our facility located in Tustin, California. To ensure the highest level of quality, every product is tested with industrial grade oscilloscope before shipping.

All IP Ignition Coil products are direct plug in replacement. No modification required for installation. We offer a One-year warranty on all IP Ignition Coils. Whether it’s a daily driver or a competition race car, our One-year warranty has you covered! 

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

Ignition Coil upgrades from Ignition Projects for your 3rd generation MINI!

The IP Coils are the ignition coil with a high power amplifier built in to it. The IP Coils produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines.

Each kit includes a set of 4 coil packs.

Fits the following models:

2014-2022 F56 MINI Cooper and Cooper S Hardtop
2015-2022 F55 MINI Cooper and Cooper S Hardtop 4-door 
2016-2022 R57 MINI Cooper and Cooper S Convertible
2016-2022 F54 MINI Cooper and Cooper S Clubman
2017-2022 F60 MINI Cooper and Cooper S Countryman

Also compatible with JCW models

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with these Plasma Direct Coils and ready to go!

See Technical Paper. 

IGNITION PROJECTS was established in the Southern California in 2011, with the vision of developing new and innovative products to enhance vehicle ignition systems. Our mission is to develop stronger ignition systems in order to optimize engine performance, lower emission ratings and improve fuel consumption. We develop and manufacture our products in our R&D facility located in the City of Tustin in the heart of Orange County, California. With new technological advances through our research and development process, IGNITION PROJECTS has become a leading Ignition Manufacturer in the global market and we are proud to have our products produced right here in the USA.

Handmade in the USA
Every Ignition Projects product is handmade in Tustin, California. Production is overseen by an engineer from Japan, and although this is more work and higher cost, it's important for us to guarantee our customers get the highest level of results.

IP Patented Technology
Ignition Projects Products Utilized US Patented Technology to provide the next level of performance for your vehicle. Our proprietary technology was designed developed by our team of engineers to innovate the best new ignition technology.

Two Time Quality Inspection on Every Product
Providing the highest level of performance to every single one or users. So we test every one of our products twice with industrial grade electronic testing equipment including an indepth oscilloscope reading. We check the product once during production and then one more time before final packaging, providing our customers with a double layer of quality control.

Professional Race Team Research & Development
We Sponsor Top Tier Professional Race Teams in Circuit Racing, Road Racing and Drifting to conduct research and development. Our products are designed to perform, so getting feedback and data from our sponsored teams help us to advance Ignition Technology in all of our products.

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.