Ignition Coils from Ignition Projects for your Gen2 Mini!

The Ignition Projects OE Replacement products are designed as plug and play replacements for your vehicle. With IP technology incorporated into the OEM design, the OE Replacement Series offers users a high quality replacement that offers a high degree of longevity and performance.

Each kit includes a set of 4 coil packs.

Fits the following models:

2007-2010 R56 MINI Cooper S Hardtop
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

Three versions available:

• 2007-2010 IP Coils
• 2011-2015 IP Coils
• 2007-2010 IP OE Replacements

Select accordingly.

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go! 

NOTE:  When installing these coil packs, the female electrical connector from the harness must be completely seated into the ignition coil before the connector locking mechanism is rotated into place.

IGNITION PROJECTS was established in the Southern California in 2011, with the vision of developing new and innovative products to enhance vehicle ignition systems. Our mission is to develop stronger ignition systems in order to optimize engine performance, lower emission ratings and improve fuel consumption. We develop and manufacture our products in our R&D facility located in the City of Tustin in the heart of Orange County, California. With new technological advances through our research and development process, IGNITION PROJECTS has become a leading Ignition Manufacturer in the global market and we are proud to have our products produced right here in the USA.

Handmade in the USA
Every Ignition Projects product is handmade in our facility located in Tustin, California. Production is overseen by our lead engineer from Japan, and although this is more work and higher cost, its important for us to guarentee our customers get the highest level of results.

IP Patented Technology
Ignition Projects Products Utilized US Patented Technology to provide the next level of performance for your vehicle. Our proprietary technology was designed developed by our team of engineers to innovate the best new ignition technology.

Two Time Quality Inspection on Every Product
Providing the highest level of performance to every single one or users. So we test every one of our products twice with industrial grade electronic testing equipment including an indepth oscilloscope reading. We check the product once during production and then one more time before final packaging, providing our customers with a double layer of quality control.

Professional Race Team Research & Development
We Sponsor Top Tier Professional Race Teams in Circuit Racing, Road Racing and Drifting to conduct research and development. Our products are designed to perform, so getting feedback and data from our sponsored teams help us to advance Ignition Technology in all of our products.

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

Performance Ignition Coils from Ignition Projects for your Gen2 Mini!

IP High Performance Ignition Coils are designed with our Patented Technology that produces more spark energy than stock coils and also generate an ultra-fast multi spark discharge of 10 sparks up to the highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines.  

Each kit includes a set of 4 coil packs.

Fits the following Cooper S models with the N14 Engine:

2007-2010 R56 MINI Cooper S Hardtop
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

Two versions available:

• 2007-2010 IP Coils for N14 engines
• 2011-2016 IP Coils for N18 engines

Select accordingly.

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!

See Technical Paper. 

NOTE:  When installing these coil packs, the female electrical connector from the harness must be completely seated into the ignition coil before the connector locking mechanism is rotated into place.

We worked with various Professional Race Teams in Road, Circuit and Drifting to conduct research and development. Our products are designed to perform and it’s important to have our products being abused through real racing conditions. 

All IP Ignition Coil products are direct plug in replacement. No modification required for installation. We offer a One-year warranty on all IP Ignition Coils. Whether it’s a daily driver or a competition race car, our One-year warranty has you covered! 

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.