× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Helps prevent tailgaters! This PULSAR pulser will get their attention! Third Brake Light PULSAR converts your 3rd brake light to 'flash' when first applied, greatly enhancing visibility to the car behind.

Fits the following models:

  • 2007-2013 R56 MINI Cooper and Cooper S Hardtop
  • 2008-2014 R55 MINI Cooper and Cooper S Clubman
  • 2009-2015 R57 MINI Cooper and Cooper S Convertible
  • 2012-2015 R58 MINI Cooper and Cooper S Coupe
  • 2012-2015 R59 MINI Cooper and Cooper S Roadster
  • 2011-2016 R60 MINI Cooper and Cooper S Countryman
  • 2013-2016 R61 MINI Cooper and Cooper S Paceman

This 'Smart' PULSAR for LED or bulb-based brake lights will flash (i.e. "pulse") your third center brake light when you apply your brakes, and then brake light will remain on without flashing as long as your brake lights are on.

When in stop-and-go traffic, SmartPulse will stop the third brake light from pulsating. When you hold your brake pedal down for more than 12 seconds and then re-apply your brake within 9 seconds, this unit will not pulse the third brake light; it will come on solid. When you reapply your brakes after 12 seconds, the unit will pulse your third brake light again. If you do not wish to have the SmartPulse enabled, simply remove the jumper at J4 and the unit will behave like the standard PULSAR.

The 'Smart' PULSAR can be configured during installation to flash about 3 seconds when set to short pulses, and about 6 seconds when set to long pulses.

Using surface-mount technology, this little unit was designed to be as small as they could get it for the MINI, and fits nicely into the third brake light cavity.

Unlike other units, this is silent during operation. No clicking!

Will this work on other cars? Yes, as long as they are 12V and have a third brake light. The 'Smart' PULSAR works with LEDs or incandescent (bulbs) brake lights.

NOTE: In some cases, wires may need to be soldered instead of using the supplied crimp connectors due to space limitations.

Brake Light Pulser | MINI Cooper R55-R61 Gen2

Brake Light Pulser | MINI Cooper R55-R61 Gen2

Brake Light Pulser | MINI Cooper R55-R61 Gen2
Part No: G2NMA2504
$25.77
Qty:
Fits the following:
MINI (2002-Current)
PayPal Pay Later

Helps prevent tailgaters! This PULSAR pulser will get their attention! Third Brake Light PULSAR converts your 3rd brake light to 'flash' when first applied, greatly enhancing visibility to the car behind.

Fits the following models:

  • 2007-2013 R56 MINI Cooper and Cooper S Hardtop
  • 2008-2014 R55 MINI Cooper and Cooper S Clubman
  • 2009-2015 R57 MINI Cooper and Cooper S Convertible
  • 2012-2015 R58 MINI Cooper and Cooper S Coupe
  • 2012-2015 R59 MINI Cooper and Cooper S Roadster
  • 2011-2016 R60 MINI Cooper and Cooper S Countryman
  • 2013-2016 R61 MINI Cooper and Cooper S Paceman

This 'Smart' PULSAR for LED or bulb-based brake lights will flash (i.e. "pulse") your third center brake light when you apply your brakes, and then brake light will remain on without flashing as long as your brake lights are on.

When in stop-and-go traffic, SmartPulse will stop the third brake light from pulsating. When you hold your brake pedal down for more than 12 seconds and then re-apply your brake within 9 seconds, this unit will not pulse the third brake light; it will come on solid. When you reapply your brakes after 12 seconds, the unit will pulse your third brake light again. If you do not wish to have the SmartPulse enabled, simply remove the jumper at J4 and the unit will behave like the standard PULSAR.

The 'Smart' PULSAR can be configured during installation to flash about 3 seconds when set to short pulses, and about 6 seconds when set to long pulses.

Using surface-mount technology, this little unit was designed to be as small as they could get it for the MINI, and fits nicely into the third brake light cavity.

Unlike other units, this is silent during operation. No clicking!

Will this work on other cars? Yes, as long as they are 12V and have a third brake light. The 'Smart' PULSAR works with LEDs or incandescent (bulbs) brake lights.

NOTE: In some cases, wires may need to be soldered instead of using the supplied crimp connectors due to space limitations.

 
 
Question:
Do you carry plug-and-play pulsating brake light adapters? I have a 2013 New MINI Cooper R59.
Answer:
We have this Brake Light Pulsar product, but it requires a little more than 'plug and play' to install this product.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
MINI Countryman Brake Light Pulsar Install instructions
Created: April 26, 2018
The brake light Pulsar for the MINI Cooper & Cooper S Countryman converts your 3rd brake light to silently 'flash' when first applied, greatly enhancing visibility to the car behind. Various configuration options are available - call us today!