This is copy of one of the best looking gas caps you will ever add to you car. Polished chrome with a flare. The "'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monza' and 'LeMans'. The design was conceived for function not looks- it allowed the racer to fill the gas tank faster. The actual cap screws onto a special brass adapter that is a tight press fit onto the neck of the tank but should be glued for safety. To fit the collar for this cap you will require 10mm(0.3937")just over 3/8" of petrol tank neck accessable above the body seal to allow fitment, many later cars do not have this much neck protruding so check first. Neck size 2 1/4"(57mm).
Question:
does this cap have a gasket to seal it?
Answer:
Yes
Question:
Is your Monza Style fuel cap SP228 vented for carburetor models or is it non-vented for injection-Minis?
Answer:
Question:
Hello, will those cap fit a 61 MGA?
Thanks,
Answer:
Hi ,
Not sure. If the neck is 2.25" inches in diameter and there's at least 3/8" of neck above the body then likely, yes.
Thanks.
Mini Mania Tech Team
The MINI Cooper Parts and Accessories Experts
Not sure. If the neck is 2.25" inches in diameter and there's at least 3/8" of neck above the body then likely, yes.
Thanks.
Mini Mania Tech Team
The MINI Cooper Parts and Accessories Experts
Question:
Is this normal pipe thread as I already have a 2 1/4" threaded pipe sticking out?
Answer:
Hi ,
Our specs don't show the thread type for the collar. But if you already have one my guess it's likely the same. If not then the cap comes with the correct one.
Mini Mania Tech Team
Our specs don't show the thread type for the collar. But if you already have one my guess it's likely the same. If not then the cap comes with the correct one.
Mini Mania Tech Team
This is copy of one of the best looking gas caps you will ever add to you car. Polished chrome with a flare. The "'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monza' and 'LeMans'. The design was conceived for function not looks- it allowed the racer to fill the gas tank faster. The actual cap screws onto a special brass adapter that is a tight press fit onto the neck of the tank but should be glued for safety. To fit the collar for this cap you will require 10mm(0.3937")just over 3/8" of petrol tank neck accessable above the body seal to allow fitment, many later cars do not have this much neck protruding so check first. Neck size 2 1/4"(57mm).
Question:
does this cap have a gasket to seal it?
Answer:
Yes
Question:
Is your Monza Style fuel cap SP228 vented for carburetor models or is it non-vented for injection-Minis?
Answer:
Question:
Hello, will those cap fit a 61 MGA?
Thanks,
Answer:
Hi ,
Not sure. If the neck is 2.25" inches in diameter and there's at least 3/8" of neck above the body then likely, yes.
Thanks.
Mini Mania Tech Team
The MINI Cooper Parts and Accessories Experts
Not sure. If the neck is 2.25" inches in diameter and there's at least 3/8" of neck above the body then likely, yes.
Thanks.
Mini Mania Tech Team
The MINI Cooper Parts and Accessories Experts
Question:
Is this normal pipe thread as I already have a 2 1/4" threaded pipe sticking out?
Answer:
Hi ,
Our specs don't show the thread type for the collar. But if you already have one my guess it's likely the same. If not then the cap comes with the correct one.
Mini Mania Tech Team
Our specs don't show the thread type for the collar. But if you already have one my guess it's likely the same. If not then the cap comes with the correct one.
Mini Mania Tech Team
Loading...

Loading...
Loading...

Loading...

Loading...

Loading...

Loading...