MINI factory replacement Clutch Rebuild Kit. This is the same kits used by the MINI dealers.

Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing
• Release Lever
• Guide Tube

Fits the following JCW models:

2014-2020 F56 JCW MINI Cooper S Hardtop
2016-2020 F57 JCW MINI Cooper S Convertible

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service.

Tightening torque

Flywheel bolts:  88.50 ft lbs. (120 Nm)
Pressure Plate bolts:  11.06 ft lbs. plus 90° (15 Nm plus 90°)

If you need new Flywheel Bolts, or a new Flywheel, see Mini Cooper Flywheel OEM Gen3

MINI factory replacement Clutch rebuild kit. This is the same kits used by the MINI dealers.

Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing
• Release Lever
• Guide Tube

Fits the following Cooper S models:

2014-2021 F56 MINI Cooper S Hardtop
2015-2021 F55 MINI Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper S Convertible
2016-2021 F54 MINI Cooper S Clubman
2017-2021 F60 MINI Cooper S Countryman

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service.

Tightening torque

Flywheel bolts:  88.50 ft lbs. (120 Nm)
Pressure Plate bolts:  11.06 ft lbs. plus 90° (15 Nm plus 90°)

If you need new Flywheel Bolts, or a new Flywheel, see Mini Cooper Flywheel OEM Gen3

MINI factory Clutch rebuild kit. This is the same kits used by the MINI dealers.

Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing
• Release Lever
• Guide Tube

Fits the following Cooper non-S models:

2014-2021 F56 MINI Cooper Hardtop
2015-2021 F55 MINI Cooper Hardtop 4-Door
2016-2021 F57 MINI Cooper Convertible

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service.

Tightening torque

Flywheel bolts:  88.50 ft lbs. (120 Nm)
Pressure Plate bolts:  11.06 ft lbs. plus 90° (15 Nm plus 90°)

If you need new Flywheel Bolts, or a new Flywheel, see Mini Cooper Flywheel OEM Gen3

MINI Factory replacement Pressure Plate Bolts.  These bolts are included in the factory Clutch Kits, but if you need just the bolts, here they are.  Set of 6 Bolts.

Micro Encapsulated M8 x 18 - 10.9 - ZNS3

Fits the Following models with the Manual Transmission:

2014-2021 F56 MINI Cooper and Cooper S Hardtop
2015-2021 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper and Cooper S Convertible
2016-2021 F54 MINI Cooper and Cooper S Clubman
2017-2021 F60 MINI Cooper and Cooper S Countryman

Tightening torque

Flywheel bolts:  88.50 ft lbs. (120 Nm)
Pressure Plate bolts:  11.06 ft lbs. plus 90° (15 Nm plus 90°)

If you need new Flywheel Bolts, or a new Flywheel, see Mini Cooper Flywheel OEM Gen3

MINI factory replacement Clutch rebuild kit. This is the same kits used by the MINI dealers.

Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing
• Release Lever
• Guide Tube

Fits the following Cooper non-S models:

2016-2020 F54 MINI Cooper non-S Clubman

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service.

Tightening torque

Flywheel bolts:  88.50 ft lbs. (120 Nm)
Pressure Plate bolts:  11.06 ft lbs. plus 90° (15 Nm plus 90°)

If you need new Flywheel Bolts, or a new Flywheel, see Mini Cooper Flywheel OEM Gen3

MINI factory replacement Clutch rebuild kit. This is the same kits used by the MINI dealers.

Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing
• Release Lever
• Guide Tube

Fits the following Cooper non-S models with the manual transmission:

2017-2020 F60 MINI Cooper non-S Countryman

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service.

Tightening torque

Flywheel bolts:  88.50 ft lbs. (120 Nm)
Pressure Plate bolts:  11.06 ft lbs. plus 90° (15 Nm plus 90°)

If you need new Flywheel Bolts, or a new Flywheel, see Mini Cooper Flywheel OEM Gen3

MINI factory replacement Clutch rebuild kit. This is the same kits used by the MINI dealers.

Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing
• Release Lever
• Guide Tube

Fits the following ALL4 models with the manual transmission:

2016-2019 F54 MINI Cooper ALL4 and Cooper S ALL4 Clubman
2017-2019 F60 MINI Cooper ALL4 and Cooper S ALL4 Countryman

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service.

Tightening torque

Flywheel bolts:  88.50 ft lbs. (120 Nm)
Pressure Plate bolts:  11.06 ft lbs. plus 90° (15 Nm plus 90°)

If you need new Flywheel Bolts, or a new Flywheel, see Mini Cooper Flywheel OEM Gen3

MINI factory replacement Clutch rebuild kit. This is the same kits used by the MINI dealers.

Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing
• Release Lever
• Guide Tube

Fits the following JCW ALL4 models with the manual transmission:

2016-2019 F54 MINI Cooper S JCW ALL4 Clubman
2017-2019 F60 MINI Cooper S JCW ALL4 Countryman

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service.

Tightening torque

Flywheel bolts:  88.50 ft lbs. (120 Nm)
Pressure Plate bolts:  11.06 ft lbs. plus 90° (15 Nm plus 90°)

If you need new Flywheel Bolts, or a new Flywheel, see Mini Cooper Flywheel OEM Gen3