Fits the following models:

2007-2010 R56 MINI Cooper S Hardtop
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible 

For a full list of gauge options, see G2NMI7330-P.

For 2002-2006 R50/R53 Hatchbacks and 2005-2008 R52 Convertibles, see NMI7307.

A Turn-key Solution

It has been well established that the Mini lacks vital instrumentation. We are ready to provide a kit that contains everything you will need to remedy that situation. This kit includes 2 gauges with everything required to install and mount it discretely and securely on the steering column of the MINI. As with all FlexPod products, the installation requires no permanent vehicle modification. Our high quality machined aluminum mounting parts and Marshall Instruments gauges look stock once installed. That means you'll never have a reason to remove them... but if you did, all elements can be removed without damage to your Mini.

A Preemptive Defense

Boost Gauge (Cooper S only) - Once you recognize the boost levels on your Cooper S, any changes in performance along with reduced boost pressure will alert you to a problem. Besides, it's fun to watch the boost level climb as it equates to POWER!

Water Temperature - since the new MINIs lack a 'real' temperature gauge, these gauges allows you to monitor the temperatures of the two most vital fluids for your engine health. It's a great tool for monitoring the engine condition when driving under extreme conditions on the track, cruising in the desert, or in stop-n-go traffic.

All Gauge Kits requires NO permanent vehicle modifications.

Kit Includes:

1- FlexPod Bracket

2- FlexPod 52mm Gauge Cups

2- Gauge Cup Back Caps

2- Adapters for the senders

1- Additional Wiring and Wire Connectors

2- Marshall Instruments Gauges

For other Gauge Kits, see our Mini Cooper Gauge Kit Application Guide.

See all Flexpod Products here.

Fits following Cooper S models:

2007-2010 R56 MINI Cooper S Hatchback
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

For a full list of gauge options, see G2NMI7330-P.

For 2002-2006 R50/R53 Hatchbacks and 2005-2008 R52 Convertibles, see NMI7307-P.

A Turn-key Solution

It has been well established that the Mini lacks vital instrumentation. We are ready to provide a kit that contains everything you will need to remedy that situation. This kit includes 2 gauges with everything required to install and mount it discretely and securely on the steering column of the MINI. As with all FlexPod products, the installation requires no permanent vehicle modification. Our high quality machined aluminum mounting parts and Marshall Instruments gauges look stock once installed. That means you'll never have a reason to remove them... but if you did, all elements can be removed without damage to your Mini.

A Preemptive Defense

Boost Gauge (Cooper S only) - Once you recognize the boost levels on your Cooper S, any changes in performance along with reduced boost pressure will alert you to a problem. Besides, it's fun to watch the boost level climb as it equates to POWER!

Oil Pressure - An oil pressure gauge can give you a lot of information about the health of your vehicle. By establishing a good baseline knowledge of your Mini's oil pressure while the car is running well, you can be alerted to any issues before they become costly problems. Low oil pressure could be a sign of a leak, worn out oil, a low oil level, high oil temperatures, or a damaged oil pump. By discovering these issues before they lead to complications or engine failure you will be much safer in a Mini that will last longer. This gauge from, Marshall Instruments, runs on a stepper motor and includes a peak recall and warning feature. With this feature, you can set your gauge ring the alarm when your oil pressure has dropped out of your desired range.

All Gauge Kits requires NO permanent vehicle modifications.

Kit Includes:

1- FlexPod Bracket

2- FlexPod 52mm Gauge Cups

2- Gauge Cup Back Caps

2- Adapters for the senders

1- Additional Wiring and Wire Connectors

2- Marshall Instruments Gauges

For other Gauge Kits, see our Mini Cooper Gauge Kit Application Guide.

See all Flexpod Products here.

Fits the following models:

2007-2010 R56 MINI Cooper Hardtop/Hatchback
2007-2010 R56 MINI Cooper S Hardtop/Hatchback
2008-2010 R55 MINI Cooper Clubman
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper Convertible
2009-2010 R57 MINI Cooper S Convertible

Not compatible with the 'Openometer' gauge on the newer Convertibles.

For a full list of gauge options, see G2NMI7330.

For 2002-2006 R50/R53 Hatchbacks and 2005-2008 R52 Convertibles, see NMI7307.

A Turn-key Solution

It has been well established that the Mini lacks vital instrumentation. We are ready to provide a kit that contains everything you will need to remedy that situation. This kit includes 2 gauges with everything required to install and mount it discretely and securely on the steering column of the MINI. As with all FlexPod products, the installation requires no permanent vehicle modification. Our high quality machined aluminum mounting parts and Marshall Instruments gauges look stock once installed. That means you'll never have a reason to remove them... but if you did, all elements can be removed without damage to your Mini.

A Preemptive Defense

Oil Pressure - An oil pressure gauge can give you a lot of information about the health of your vehicle. By establishing a good baseline knowledge of your Mini's oil pressure while the car is running well, you can be alerted to any issues before they become costly problems. Low oil pressure could be a sign of a leak, worn out oil, a low oil level, high oil temperatures, or a damaged oil pump. By discovering these issues before they lead to complications or engine failure you will be much safer in a Mini that will last longer. This gauge from, Marshall Instruments, runs on a stepper motor and includes a peak recall and warning feature. With this feature, you can set your gauge ring the alarm when your oil pressure has dropped out of your desired range.

Water Temperature - since the new MINIs lack a 'real' temperature gauge, these gauges allows you to monitor the temperatures of the two most vital fluids for your engine health. It's a great tool for monitoring the engine condition when driving under extreme conditions on the track, cruising in the desert, or in stop-n-go traffic.

All Gauge Kits requires NO permanent vehicle modifications.

Sample Parts List:
May vary slightly depending on the kit.

1- FlexPod Bracket

2- FlexPod 52mm Gauge Cups

2- Gauge Cup Back Caps

2- Adapters for the senders

1- Additional Wiring and Wire Connectors

2- Marshall Instruments Gauges

See Conventional Gauge Kits installation instructions here.

For other Gauge Kits, see our Mini Cooper Gauge Kit Application Guide.

See all Flexpod Products here.

Fits the following models:

2007-2010 R56 MINI Cooper S Hatchback
2008-2010 R55 MINI Cooper S CLUBMAN
2009-2010 R57 MINI Cooper S Convertibles

For 2002-2006 R50/R53 Hatchbacks and 2005-2008 R52 Convertibles, see NMI7307-P.

A Turn-key Solution

It has been well established that the Mini lacks vital instrumentation. We are ready to provide a kit that contains everything you will need to remedy that situation. This kit includes 2 gauges with everything required to install and mount it discretely and securely on the steering column of the MINI. As with all FlexPod products, the installation requires no permanent vehicle modification. Our high quality machined aluminum mounting parts and Marshall Instruments gauges look stock once installed. That means you'll never have a reason to remove them... but if you did, all elements can be removed without damage to your Mini.

A Preemptive Defense

Boost Gauge (Cooper S only) - Once you recognize the boost levels on your Cooper S, any changes in performance along with reduced boost pressure will alert you to a problem. Besides, it's fun to watch the boost level climb as it equates to POWER!

Oil Temperature - since the new MINIs lack a 'real' temperature gauge, these gauges allows you to monitor the temperatures of the two most vital fluids for your engine health. It's a great tool for monitoring the engine condition when driving under extreme conditions on the track, cruising in the desert, or in stop-n-go traffic.

All Gauge Kits requires NO permanent vehicle modifications.

Kit Includes:

1- FlexPod Bracket

2- FlexPod 52mm Gauge Cups

2- Gauge Cup Back Caps

2- Adapters for the senders

1- Additional Wiring and Wire Connectors

2- Marshall Instruments Gauges

For other Gauge Kits, see our Mini Cooper Gauge Kit Application Guide.

See all Flexpod Products here.