Classic Mini Cooper Gears
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | DAM4930 | 1 | 1st Motion shaft 17 teeth |
| 1 | DAM6242 | 1 | 1st Motion shaft 16 teeth No Longer Available |
| 2 | 13H9513 | 1 | Bearing for 1st Motion inner |
| 3 | ADU7619 | 1 | Ball Bearing for 1st Motion shaft |
| 4 | 22G850 | 1 | Circlip to retain roller bearing |
| 5 | DAM3187 | 1 | Layshaft |
| 5 | C-22A1739 | 1 | Layshaft, Upgraded and precision ground |
| 6 | DAM4931 | 1 | Laygear (30/26/21/15 teeth) Used only |
| 6 | DAM6238 | 1 | Laygear (31/27/21/15 teeth) NLA No Longer Available |
| 7 | 13H9513 | 1 | Bearing for laygear small end |
| 8 | CHM141 | 1 | Bearing for laygear large end |
| 9 | DAM3180 | 1 | Thrust washer 0.121-123”(3.07-3.12mm) CWE |
| 10 | DAM3181 | 1 | Thrust washer 0.124-126”(3.14-3.20mm) |
| 10 | DAM3182 | 1 | Thrust washer 0.127-129”(3.22-3.27mm) |
| 10 | DAM3183 | 1 | Thrust washer 0.130-132”(3.30-3.35mm) |
| 11 | TUB10020 | 1 | Reverse gear with single bush Early had 2 bushes |
| 12 | TUJ10001 | 1 | Bush for reverse gear |
| 13 | DAM8038 | 1 | Idler shaft for reverse gear |
| 14 | DAM7484 | 1 | Main shaft |
| 15 | 22G2033EVO | 4 | Baulk ring Pre-2000 Rover Spec CNC machined grooves |
| 15 | 22G2033MS | 4 | Baulk ring sintered |
| 15 | C-22A1741 | 4 | Baulk ring steel performance |
| 16 | DAM7456 | 1 | Synchroniser 3rd/4th hub assembly |
| 17 | BLS107 | 3 | Ball bearing for synchroniser hub |
| 18 | 22G2262 | 3 | Spring for synchroniser hub |
| 19 | DAM4933 | 1 | 3rd gear 21 teeth |
| 19 | DAM6241 | 1 | 3rd gear 20 teeth Metro and SPI cars |
| 20 | AAU1816 | 1 | Roller bearing for 3rd gear |
| 21 | 22G947 | 1 | Thrust retaining collar for 3rd gear |
| 22 | 22G843 | 3 | 2nd 3rd collar retaining peg No Longer Available |
| 23 | 22G154 | 2 | Spring for 2nd/3rd retaining peg No Longer Available |
| 24 | DAM4932 | 1 | 2nd gear 26 teeth |
| 24 | DAM6240 | 1 | 2nd gear 25 teeth 12A/GO4/JO5.J92 |
| 25 | AAU1816 | 1 | Roller bearing for 2nd gear |
| 26 | 22G839 | 1 | Thrust retaining collar 2nd gear |
| 27 | DAM7456 | 1 | Synchroniser 1st/2nd hub assemble See DAM7300 outer track |
| 27 | DAM7300 | 1 | Synchroniser 1st/2nd Outer track only Repair part |
| 28 | 22G1096 | 1 | 1st gear |
| 29 | AAU1815 | 1 | Roller bearing for 1st gear |
| 30 | 22G837 | 1 | Journal for 1st gear and bearing Use U-22G837 |
| 31 | AAU1365 | 1 | Mainshaft double row ball bearing |
| 32 | ADU4992 | 1 | Snap ring, spacer for bearing Use U-22G72 |
| 33 | GUG705645GM | A/R | Shim 2 thou Use 2A3714 |
| 33 | GUG705646GM | A/R | Shim 10 thou |
| 33 | 2A3715 | A/R | Pinion Shim .004 |
| 34 | 2A3581 | 1 | Locking plate No Longer Available |
| 35 | DAM5996 | 1 | Retainer for roller bearing No Longer Available |
| 36 | DAM2377 | 1 | Locktab for retainer As required |
| 37 | SH505061 | 1 | Screw 5/16” UNC x 3/4” long Was 7/8” long |
| 38 | DAM2808 | 1 | Pinion for final drive 19 teeth (3.1 and 3.2) See CWP3-1 |
| 38 | TCC10001 | 1 | Pinion for final drive 21 teeth (2.76) see CWP2-76 12A/GO4/JO5.J92 |
| 39 | DAM6140 | 1 | Locktab for pinion |
| 40 | DAM7485 | 1 | Nut for locking mainshaft |
