Classic Mini Cooper Cooper ' S ' 970ccc & 1070cc & 1275cc MK 1/MK2
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | AEG624 | 4 | Connecting rod, 5.75" centers 1071cc, 1275cc |
| 1 | AEG309 | 4 | Connecting rod, 5.875 970cc only |
| 2 | AEG519 | 8 | Connecting rod bolt (Hi-specification bolt use BE6001+) |
| 3 | AEG147 | 8 | Connecting rod nut (Alternative non nyloc EAC5541A) |
| 4 | C-AEG329 | 1 | Crankshaft (Steel billet EN40B)(AEG330 casting) 970cc |
| 4 | C-AEG170 | 1 | Crankshaft (Steel billet EN40B)(AEG171 casting) 1071cc |
| 4 | C-AEG479 | 1 | Crankshaft (Forging crossdrilled EN40B)(AEG480 casting) 1275cc |
| 5 | 6K836 | 1 | Crankshaft keyway |
| 6 | VP572 | 1 | Connecting rod bearings set (8G2399) Oversize available |
| 7 | VP91120 | 1 | Main bearings set (8G2391) Oversize available |
| 8 | VPW41 | 1 | Thrust washer kit Available 03/15/30 oversize |
| 9 | 22G1053 | 1 | Primary gear (24 teeth) |
| 10 | DAM8889 | 1 | Front bush, was 22G770 |
| 11 | 22G109 | 1 | Rear bush |
| 12 | DAM6490 | 1 | Primary gear shim 2.84-2.89mm (.112-114") These shims are used to give the correct end float of 3-6 thou on the primary gear check 22A319 and 88G459 for wear. |
| 12 | DAM6486 | 1 | Primary gear shim 2.89-2.94mm (.114-116") |
| 12 | DAM6487 | 1 | Primary gear shim 2.94-2.99mm (.116-118") |
| 12 | DAM6488 | 1 | Primary gear shim 2.99-3.04mm (.118-120") |
| 12 | DAM6489 | 1 | Primary gear shim 3.04-3.09mm (.120-122") |
| 13 | 22A319 | 1 | Thrust washer U clip |
| 14 | 88G549 | 1 | Backing ring |
| 15 | AEG148 | 1 | Camshaft |
| 15 | AEG510 | 1 | Camshaft 1275 only, 9FSAY 40006 on |
| 16 | AHU2379 | 1 | Camshaft locating plate |
| 17 | GHF117 | 3 | Locating plate screw |
| 18 | GHF321 | 1 | Shakeproof spring washer |
| 19 | 12G1397 | 1 | Duplex Camshaft Gear |
| 20 | 12G1699 | 1 | Duplex Crankshaft Gear |
| 21 | 6K629 | 1 | Camshaft Nut |
| 22 | 2A759 | 1 | Camshaft Nut Locktab |
| 23 | 2H4905 | 1 | Duplex Timing Chain |
| 24 | 6K628 | A/R | Crank Gear Shim |
| 25 | CAM4700 | 1 | Front Plate Gasket |
| 26 | 12G2626 | 1 | Front Engine Plate |
| 26 | AEG161 | 1 | Front Plate Cooper S Type 1275 |
| 27 | AEA687 | 2 | Screw, plate to maincap |
| 28 | GHF120 | 5 | Bolt, Plate To Block |
| 29 | GHF332 | 5 | Lock Washer |
| 30 | AEG314 | 8 | 1275cc Push Rod |
| 31 | 2A13 | 8 | Cam Follower (Lifter) |
| 32 | 12G4499 | 1 | Distributor Drive Spindle (Pre A+ Type) |
| 33 | 13H2792 | 1 | O-Ring, Pre-A+ Distributor Housing |
| 34 | 12A1136 | 1 | Used, Pre-A+ Distributor Housing |
| 35 | WKN505 | 1 | Camshaft Woodruff Key |
