yes it is still available. you can hit me in the privates for any more details -are you near san jose Ca.? rjm

Is the AC unit still for sale? If no, where can I buy 1?

Thank you,

Josh

I can add that I have an Air Con setup from a 1994 JDM Mini. I was going to install it in my MK1, but plans have changed. It would be available if someone is intrested.

The set up shown runs with the V pulley, only the MPI's ran the serpentine belt afaik.

Thanks for the info, that's what I figured, wasn't sure though. Still more questions than solutions for me at this point.

Like which engine am I going to use, equipped with either a V or serpentine pulley. 

SXSMAN the evap and heater are seperate on all Mini's with a/c that i have seen. This set up is probably from a pre injection late 80's early 90's car and it should have the all important idle step up assembly that fits on the side of the carb so the car still idles when the a/c is switched on.

I see that the blower housing is separate , are the evap unit and heater core in the same housing ?

There may be a image under parts from host, I'll look.

here are pics of what i have 

You can email me at [email protected] or post pictures here so others can see.

the price is shameful! If you're truly interested in the AC from my car I can take some pics to show what I have and you can make an offer.

Too rich for my blood.....//www.ebay.com/itm/J-Spec-Classic-Mini-Cooper-Rover-Air-Conditioning-System-/261559492238?&_trksid=p2056016.l4276

ebay item # 261559492238

May still have to take a page from Bob Kimes and build my own "Ice box mini".

I am certainly willing to part with it - I have no idea if it is complete and/or functional. looks to be though.

I would prefer a local deal - But what I realy want is all the parts to make the car NON a/c as far as the altenator /brackets etc are concerned.

I was going to use a HVAC from a limo but if some has an A/C system from a mini I might be a player on it.

sxsman @ hotmail.com

What did you end up buying? The seller and are still in contact with each other. We share same interest in bicycles and diesels. May do some builds together! Its great to meet some random person and find so many common interests. Regarding the A/C all I really want is to set the car up for no A/C (alt/ alt brackets . what ever else is nec for that swap (I still don't know what brackets etc are nec. -but if you have a non A/C set up and need this set up -why not we just swap?

I had a Japanese spec SPi car with aircon. Hands down the nicest, most "modern" Mini I've had so far.  It'd do 80mph across the island with the aircon on and the windows up!  If the damn later seats weren't so friggin huge I would have kept that car. 

He was a good guy. I was choosing between that car and another car.  I went with the other one. That was a good one though. It was a tough choice.  What do you want for the A/C parts?

yep- -it took a few months - but I finally wore him down to my budget. A great guy BTW.

The car needs work but nothing major. Its getting a set of SU's and an innocenti dash -

I drive  it most everyday to work!

Russ, Did you het the car from a guy in Oakland?  Green with side mirrors mounted on the fenders?  If it is I beleive that all of the parts were there.

Hello Gents, I have what appears to be a complete A/C system off my '94 spi J spec. mini. The car is LHD. Curiously, I was going to post up a help request asking if I could use my same alternator BUT in the Non A/C location (low) If anyone is intereted in the A/C parts -please let me know - Be aware the condenser /dryer etc. has been removed for sometime and althoughthe pump is still onthe car -it is not connected to anything. the center section of the dash is also out of the car and I cannot vouch for its completeness (I bought the car about 1 month ago with most of the A/C stuff in a box) I really only want to be able to get the alternator in its non - A/C location. I am willing to trade the parts for making this switch complete.

I live in san Jose Ca. (95124) any help is appreciated. Russ

~£150 might be acceptable depending on the total parts shipped. The bracket and any pulleys are the most important part. Let me contact you offline. (email)